Diamond Products CB18BV-XL - Manual (Page 18)

GENERAL SAFETY PRECAUTIONS
WARNING: Do not operate power unit without reading this entire manual and the engine
operation manual first. Keep manuals with power unit at all times for reference.
This manual describes the operating procedures, care, maintenance, adjustments, and safety
precautions for proper use of this machine. This equipment is intended for industrial
applications by experienced operators. It is to be operated in conformance with applicable
federal, state, and local codes or regulations pertaining to safety, air pollution, noise, etc.
Tool operators and maintenance personnel must always comply with the safety precautions
given in this manual and on the stickers and tags attached to the equipment.
These safety precautions are given for your safety. Review them carefully before operating
the tool and before performing general maintenance or repairs.
Supervising personnel should develop additional precautions relating to the specific work
area and local safety regulations.
In addition to this manual, read and understand safety and operating instructions in the
Engine Operation Manual furnished with the Power Unit in addition to this manual.
 Establish a training program for all operators to ensure safe operation.
 Do not operate the power unit unless thoroughly trained or under the supervision of an
instructor.
 Do not inspect or clean the power unit while it is running.
 Always use hoses and fittings rated at a minimum 2850 PSI (196.5 bar) with a 4 to 1
safety factor for pressure lines.
 Be sure all hose connections are tight.
 Make sure all hoses are connected for correct flow direction to and from the tool being
used.
 Do not inspect hoses and fittings for leaks by using bare hands. “Pin-hole” pressure leaks
can penetrate the skin.
 Never operate the gas power unit in a closed space. Inhalation of engine exhaust can
be fatal.
 Do not operate a damaged or improperly adjusted power unit.
 Never wear loose clothing that can get entangled in the working parts of the power unit.
 Keep all parts of your body away from the working parts of the power unit.
18