Diamond Products GDS60 - Manual (Page 5)


Wear gloves and be alert to the
surrounding environment when handling
blades.
 When installing the blade, always fit the
groove in the blade to the main drive wheel.
 DO NOT exceed the blade’s maximum
recommended speed when cutting.
Excessive blade speeds can cause blade
breakage, resulting in serious injuries and/or
death!
 DO NOT use damaged blades when cutting
to avoid harming yourself, others, or the
saw.
Blade Guard Safety
 DO NOT operate the saw with the blade
guard removed.
 Always inspect the blade guard prior to
operating the saw.
 Replace damaged components
immediately.
 DO NOT install or remove the blade guard
with the saw running.
Cutting Safety

The direct work area must be checked prior
to cutting for buried or imbedded electrical,
gas or water lines that could be damaged
and/or cause personal injury while cutting.

Turn off all electricity, gas, and water
around the direct work area prior to cutting.
 DO NOT expose yourself or anyone else to
the direct line of the blade when operating
the saw.
 DO NOT allow any person, animal, and/or
object in and around the work area while
cutting.