Diamond Products HCH50 - Manual (Page 7)

Design and function
DIAMOND PRODUCTS AG bar
Design
Fig.
1-5
Bar
1. Water inlet 4. Assembly opening
2. Chain guide 5. Reversing wheel
3. Assembly bore hole
for chain tensioner
Function
The bar is securely fixed to the chain saw unit. The chain runs and is guided
on the bar. The bar provides lateral support for the chain. The cutting
pressure is absorbed via the bar.
Information
The bar serves solely to guide the diamond chain. Never use the bar as
a lifting tool or a crow bar.
1 2
3 4 5
7