Diamond Products CS-2000 - Manual (Page 5)

CAUTION:
1. Never attempt any adjustment or repair to the machine while the engine is running.
2. Never put hands or feet under the machine with engine running or serious injury will
result.
3. Never work under the machine without first blocking the machine in the raised position,
blocking the wheels and removing the key.
4. The brake on this machine is a parking brake. Be sure to set the parking brake
before starting.
5. This machine is designed for use on hard flat surfaces. Use extreme caution when
loading and unloading.
6. This machine has no lifting points. To lift, use slings under the base plate.
BEFORE STARTING:
1. Be sure the blade pump is turned off.
2. Place directional travel lever in neutral.
3. Set parking brake.
4. Set engine throttle control at high idle.
5. Start engine.
It is our sincere desire to help you work safely and profitably. Please take the time to read
and follow the information supplied for your benefit. Should you require parts or service please
call Diamond Products Specialty Equipment Division at 1-800-321-5336.
SAFETY & STARTING PROCEDURES
CURB CUTTING MACHINE
5