Diamond Products SB - Manual (Page 10)

TYROLIT Hydrostress AG
Page 10 SB
Water connection
The cooling water of the saw system flows from the drive unit directly to the water distribution
on the SB wire saw. The water is led via the water distribution block to the diverter rolls and the
water lances. The quantity of water can be metered at the drive unit and the water valve block.
Water distribution
Hydraulic connections
The SB wire saw is combined with a TYROLIT drive unit to form the wire sawing system. Infor-
mation about the correct way to connect and operate these units can be found in the operating
instructions for the drive unit.
1 Diamond wire drive motor
2 Hydraulic cylinder feed motion
3 Diamond wire drive motor leakage oil connection
3.9 3.9
3.10 3.10