Dings Dynamics Group 90 Series End Mount - 450 lb-ft NEMA 4 - Manual (Page 7)

7
REF.
NO. QTY. DESCRIPTION
STD. HSG.
2-90000-30
SERIES PART NO.
ENCL. HSG.
4-90000-31
SERIES PART NO.
SEVERE DUTY HSG.
6-90000-32
SERIES PART NO.
1 1 Bracket 2 & 3 Disc Model L090117-001 L090127-001 L090117-001
1 1 Bracket 4 & 5 Disc Model L090118-001 L090128-001 L090118-001
2 8 Stud 2 Disc Model H090092-001
2 8 Stud 3 Disc Model H090092-002
2 8 Stud 4 Disc Model H090092-003
2 8 Stud 5 Disc Model H090092-004
3* 1 Hub Assembly 2 & 3 Disc Model K090123
3* 1 Hub Assembly 4 Disc Model K090124
3* 1 Hub Assembly 5 Disc Model K090125
4 1 Pipe Plug W010002-002
5 Note 1 Rotating Disc Assembly K090122-001
6 Note 2 Stationary Disc K090107-001
7 1 Pressure Plate Assembly K090115-001
8 1 Cover L090119-001
9 1 Release Knob G090275-001
10 2 Pin 3/16” x 1.0” W005003-139
11 1 Shaft Extension H090111-001
12 1 “O” Ring W006001-003
13 8 Lockwasher 3/8” W004006-008
14 8 Hex Head Capscrew W001007-057
15 8 Jam Nut 1/2-20 W003003-023
16 11 Locknut 1/2-20 W003001-020
17 1 Magnet Plate Assembly L090103-001
18** 12 Magnet Coil H090099
19 4 Insulating Washer G080016-001
20 2 Bushing W013001-001
21 1 Bushing W013002-001
22 1 Pin 1/8” x 1.0” W005003-077
23 1 Pin 3/16” x 1.0” W005003-139
24 1 Pin 5/16” x 1.0” W005003-263
25*** 1 Mag. Assy. W/Coils-Auto Return Rel.-Standard L090121
25*** 1 Mag. Assy. W/Coils-Deadman Release-Special L090132
26 6 Hex Socket Head Capscrew W001013-113
27 1 Cam – Auto Return Release – Standard H090102-001
27 1 Cam – Deadman Release – Special H090101-001
28 1 Pin 7/32” x 1.0” W005003-232
29 1 Return Spring H090089-001
30 1 Washer W004004-009
31 1 Nut 3/8-24 W003001-018
32**** 1 Pivot Block Assembly – L.H. H090106-001
33**** 1 Pivot Block Assembly – R.H. H090105-001
34 2 Lok Dowel 1/2” D x 1.5” W005007-058
35 1 Operator Arm K090126-001
36 1 Hex Head Capscrew W001008-003
37 1 Bearing Sleeve G090267-001
38 1 Ball Bearing W009001-013
39 1 Washer 1/4” W004003-022
40 2 Hex Socket Head Set Screw W002010-015
41 1 Torque Adjusting Screw G090264-001
42 2 Pressure Rod G090262-001
43 2 Pressure Spring G090259-001
44 2 Seat G090266-001
45 2 Hex Soc. Hd. Shld. Screw W001010-048
46 2 Shock Absorber Assembly H090103-001
47 2 Snap Ring W006006-003
48 1 Snap Ring W006009-001
49 1 Torque Spring Holder G090258-001
50 1 Snap Ring W006006-004
51 1 Torque Spring Hldr. Assembly H090104-001
52 1 Torque Spring Bushing G090263-001
53 1 Torque Spring – Inner G090261-001
54 1 Torque Spring – Outer G090260-001
55 1 Torque Spring Guide G090278-001
56***** 1 Release Shaft Assembly – Models 92180 & 94360 G090277-001
56***** 1 Release Shaft Assembly – Models 93270 & 95450 G090277-002
57 1 Pin 1/8” x 7/8” Driv Lok W005004-001
58 1 Cover Gasket ----- K090121-001 K090121-001
59 1 Mounting Face Gasket ---------- K090134-001
60 1 Operator Assembly 2 & 4 Disc (Standard Release) L090120-001
60 1 Operator Assembly 3 & 5 Disc (Standard Release) L090120-002
60 1 Operator Assembly 2 & 4 Disc (Deadman Release) L090120-005
60 1 Operator Assembly 3 & 5 Disc (Deadman Release) L090120-006
61* 1 Seal Ring ----- H090117 -----
62 1 Seal ----- W011001-013 -----
63 1 Pipe Plug W010002-004
Table 1. Parts List
* Specify Hub Bore and Keyway Size Note 1 Number of Rotating Disc is Shown as
** Specify Voltage and Frequency **** Items 32 and 33 include Item 34 Second Digit of Model No.
*** Specify Voltage and Frequency ***** Item 56 includes Items 10 and 57 Example: 2-93270-30 Has 3 Discs.
Item 25 includes Items 17 thru 24 Note 2 Number of Stationary Discs is One Less
Than the Number of Rotating Discs.