Product specifications – Airlink101 APSUSB2 User Manual
Page 34
33
11. Product Specifications
Printer Connection
Printer Interface: One USB Port (Ver. 1.1), Two 25-pin Parallel Ports
Network Connection
Network Interface: RJ-45 connector for 10Base-T or 100Base-TX shielded
Network Standards: IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX Fast
Ethernet
Network Data Transfer Rate: 10/100 Mbps
Network Protocols
Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto-switching)
Transport Protocols: TCP/IP, NetBEUI, AppleTalk
TCP/IP Protocols Supported: BOOTP, SNMP, Telnet, TFTP, FTP, LPD, RARP, DHCP
Management and Diagnostics
Standard: SNMP
MIBs: MIB-II (RFC 1213)
Diagnostic LED Indicators: Power, Link/Act, USB, LPT1, LPT2
Environmental and Physical
Power Supply: External power supply providing 5VDC input
Dimensions: 193 mm x 117 mm x 34 mm
Weight: Appx. 300 g
Operating Temperature: 0 degree C to 50 degree C (32 to 122 F)
Storage Temperature: -25 degree C to 55 degree C (-13 to 131 F)
Humidity: 5% to 95%, non-condensing
Emissions: FCC Class B, CE Class B