NetMedia VS4X4 User Manual

Vs4x4, Video matrix switcher, Features

Advertising
background image

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

MAN-VS4X4 REV0705A

Factory Pins

For factory use only.

Power Connector

12V DC 300mA, center positive.

Selects 1-4 inputs for 1-4 separate outputs
Works as video switcher or splitter
Manual or automatic switching
Microprocessor controlled
Supports NTSC or PAL in color and B/W
Setup retained during power outage
Tough aluminum housing
Includes power supply
1 year limited warranty

Dwell Time:
Video Bandwidth:
Video Crosstalk:
Video Output Connectors:
Video Input Connectors:
Power Requirement:
Power Connector:
Housing Size:
Weight:

1 to 255 seconds

12MHz

-70 db

4 - Female RCA, 75 Ohm
4 - Female RCA, 75 Ohm

12V DC, 300mA

5.5mm OD, 2.1mm ID, center positive

5.5“ long x 3.5” wide x 0.9“ high

8.5 oz.

(subject to change without notice)

FEATURES

Product Includes:

1. Video Switcher Assembly (4 Video Input Connectors, 4 Input LED’s, Input Select Button,

Rotation LED, 4 Video Output Connectors, 4 Output LED’s, Output Select Button, Dwell Time
LED, 10 Sec/Plus Button, 1 Sec/Minus Button, Label Area, Power Connector, Factory Pins).

2. 12V DC 300mA Power Transformer (Center Conductor Positive).

The NetMedia VS4X4 Video Matrix Switcher sends 4 video inputs to 4 different outputs. Each output can show a

single input or a rotating combination of inputs. The selected inputs and combinations may be the same or differ-

ent for each output. To use as a 4-way video distribution amplifier, setup Input 1 as the only source for all 4 outputs.

To setup one or more outputs as a sequencer, enable multiple inputs and select rotation mode. To setup one or

more outputs as a manual switcher, deselect rotation mode and choose the desired input.

SPECIFICATIONS

Video Matrix Switcher

VS4X4

4 inputs with 4 programmable outputs

Input 1 LED

Indicates the selected
input and its status.

Label Area

Provides space for input
and output designators.

Output 1 LED

Indicates the selected
output and its status.

10 Sec/

Plus Button

Adds 10 sec to dwell time or

enables inputs and outputs.

Input Select Button

Chooses rotation mode or
individual input to
view/enable/disable.

Rotation LED

Indicates that selected
output is in rotation mode.

Output Select Button

Selects output to
program/enable/disable.

Dwell Time LED

Lights for 10 sec after

Rotation LED selected to

set dwell time.

1 Sec/

Minus Button

Adds 1 sec to dwell time or

disables inputs and outputs.

VS4X4

Video Output 1

Connects output device for
Output 1 LED
(2,3,4 follow).

Video Input 1

Connects input device for
Input 1 LED
(2,3,4 follow).

Advertising