NetMedia VIDLAMP-DI User Manual

Nm-vidlamp, Security video camera, Features specifications

Advertising
background image

NM-VIDL

AMP

MAN-VIDLAMP REV1003A

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Security Video Camera

NM-VIDLAMP

Color

Indoor/Outdoor Weather Resistant

Day/Night

Color

Elbow Bracket

Adjusts camera angle at base,
screw, and housing. Installs in
1/2” junction box covers.

Camera Lens

Comes prefocused from

factory but can be adjusted

by rotating in either direction.

Camera Bracket

Slot indicates image bottom;

rotate to adjust camera.

Housing

Available in Ivory only:

Model Camera Type

Base, Gasket & Screws

Mount to round 4” junction box.

Video Connector

Female BNC connector.

Power Connector

12V DC 300mA, center positive.

Excellent image quality
Tough aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty

Camera Lens:

Image Sensor:

Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Output Connector:

Power Requirement:
Power Connector:

Housing Size:

Base Size:

Mounting Holes:

Weight:

Female BNC, 75 Ohm

12V DC, 300mA

5.5mm OD, 2.1mm ID, center positive

3.13“ dia., 4” long

4.5” dia., 0.75” high, 0.5“ hole

3.5” centers

1 lb.

(subject to change without notice)

FEATURES

SPECIFICATIONS

Color

Housing Cap

Remove to rotate camera

bracket or to adjust focus.

Locking Ring

Secures elbow bracket to
base at desired position.

Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, Video Connector; Power Connector).
2. 12V DC 300mA Power Transformer (Center Conductor Positive).
3. Mounting hardware (Mounting Screws, Grounding
Strap, Screw and Compression Ring).

The NetMedia VIDLAMP security cameras mount to a typical round 4 inch junction box and are viewed with a security
monitor. Other junction boxes from your local hardware store may also be used after replacing the round base with another
that has a 1/2 inch diameter hole for the elbow bracket. To view the cameras on a single standard television, use the TV’s
composite RCA Video Input jack.

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

NM-VIDLAMP-CI
NM-VIDLAMP-DI

Color
Day/Night Color

Day/Night Color

3.6mm

1/3” CCD

540 lines

72˚ Horizontal

0.1 Lux

Yes

Advertising