NetMedia MM70S User Manual

Nm-mm70s, Features, Specifications

Advertising
background image

NM-MM70S

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Single Channel Stereo Modulator

NM-MM70S

MAN-MM70S REV0708A

Baseband A/V to SDTV Converter

RF Output Connector

Connects modulated stereo output
channel to video distribution
system and televisions.

Switch Bank

Behind End Plate -

Sets output channel:

UHF 14-69

CABLE 70-94, 100-125.

End Plate

Remove to access Switch Bank
and Gain Adjustment.

Power LED

Indicates that unit is on.

A/V Input Connector

Composite video and stereo audio input

for A/V sources such as cameras, quads,

DVR’s, DVD’s, etc.

Power Input Connector

12V DC 100mA, center positive.

Stereo audio input and output
Digital PLL locked audio & video - no drift
Combines with existing TV channels
Viewable on multiple televisions
UHF & Cable channel coverage
Channel retained during power outage
Tough aluminum housing
Includes power supply
5 year limited warranty

Modulation Method:

Output Channel:

Output Level:

Output Connector:

Input Connector:

Video Input Signal:

Audio Input Signal:

Audio Output:

Cable Type:

Power Requirement:

Power Connector:

Housing Size:

Weight:

Digital Crystal PLL

SDTV: UHF 14-69, CABLE 70-94, 100-125

Selectable, 0 to +30dBmV

Female F, 75 Ohm

3.5mm A/V jack

Baseband, 75 Ohm, 1 Vp-p

Stereo, 75,000 Ohm, 1 Vp-p

MTS Stereo

RG59, RG6 or better

12V DC, 100mA

5.5mm OD, 2.1mm ID, center positive

3.2“ long x 2.2” wide x 0.9“ high

4.0 oz.

(subject to change without notice)

FEATURES

Gain Adjustment

Behind End Plate -
turn clockwise to increase
output level to over +30dBmV.

Product Includes:

1. Modulator Assembly (A/V Input Connector, RF Output Connector,

Power Input Connector, End Plate, Switch Bank, Gain Adjustment, Power LED).

2. 12V DC 100mA Power Transformer (Center Conductor Positive).

3. 3.5mm to 3 RCA A/V Cable.

The NetMedia MM70S Stereo Modulator converts composite video and stereo audio to an MTS Stereo

television signal. The selectable channel is viewed with a standard television (SDTV) tuner. Once modu-

lated, the signal is no longer bound to a single monitor or TV; it can be combined with antenna, cable, or

satellite signals for distribution to multiple TV’s throughout the location. This provides convenient view-

ing access to security cameras, DVR’s, or other audio/video (A/V) sources such as DVD’s and VCR’s.

SPECIFICATIONS

Advertising