Assembly – Nokta detectors Velox One User Manual User Manual

Page 7

Advertising
background image

ASSEMBLY

Holding the metal pin pressed, insert the S-rod

into its place underneath the system box and

secure it by tightening the wingnut as shown in

the picture.

Again by holding the metal pin pressed, insert the

upper shaft into the S-rod and click the pin into its

hole. Then, secure it by tightening the twist lock.

6

Insert the extension shaft into the upper shaft

holding the metal pin pressed and adjust the

height by clicking the pin into one of the holes.

Then, secure it by tightening the twist lock again.

Advertising