Introduction warnings and reminders – Nokta detectors RS Pinpointer User Manual

Page 2

Advertising
background image

NOKTA ENGINEERING

INTRODUCTION

WARNINGS and REMINDERS

Thank you for choosing and purchasing our Nokta RS Pinpointer.

Nokta RS Pinpointer is a hand-held metal detector designed to pinpoint targets

detected by conventional metal detectors.

Do not expose the device to very hot (for example, inside a hot car) or cold conditions

for extended periods of time.

RS Pinpointer is not a digging tool. Do not use it for digging or extracting stones or

metals.

Only the end of the probe is waterproof. Do not immerse the control box in water; do

not expose the device to extreme humid conditions.

Do not use the device to locate power lines. Using the device near power lines may

cause harm to the device.

Always keep the device off when not in use. This will help increase battery life and

device performance.

Sudden changes in ambient temperature can drastically affect the performance of

the device. Therefore, it is recommended not to use the device immediately after sudden

temperature changes but to wait for approximately 10 minutes.

Audio alert consumes less battery power than vibration alert. Using the audio alert

when possible will extend battery life.

For Consumers within the European Union: Do not dispose of this equipment in general

household waste. The crossed wheeled bin symbol on this equipment indicates this unit should

not be disposed of in general household waste, but recycled in compliance with local

government regulations and environmental requirements.

Audio / Vibration / Off

Battery Cover

Light Sensor

360° Detection

Waterproof Pinpointing Tip

LED Flashlight

FCC STATEMENT: This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired operation.

Advertising