Parts and assembly – Nokta detectors Fors Tech User Manual

Page 7

Advertising
background image

1

1

3

2

3

2

4

PARTS and ASSEMBLY

1)To attach the telescopic shaft to

the S-rod, first loosen the twist

lock. 2)By holding the metal pin

pressed, insert the telescopic

shaft into the S-rod and click the

pin into its hole. 3)Secure it by

tightening the twist lock. 4)After

adjusting the shaft length to your

height, secure by tightening the

twist lock.

1)Place the washers into the

openings at the end of the

telescopic shaft. 2)Place the shaft

on the coil as shown in the

picture. 3)Secure by tightening

the bolt and the wingnut.

Wrap the coil cable around the

shaft all the way up as shown in

the picture and after inserting it in

the coil input socket underneath

the system box, secure it by

twisting the connector. Pay

attention to not wrap the cable

too tight during this step. Insert

the handle cable in the socket

underneath the system box

(HANDLE) and secure it by

twisting the connector. Finally,

secure the cable by attaching the

clamps at 3 different spots.

FORS / Page 5

www.noktadetectors.com

NOKTA DETECTORS

Advertising