Nova-Tech DCT Series - Manual (Page 5)

3.2 LOCATING AND PROTECTING YOUR SCALE
In order to keep you scale functioning at its best we suggest that you do the
following:
Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
Make sure the scale is located on a strong table and
free from vibration.
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or
large motors. Do not mix batteries and use only the
factory approved power adapter supplied with the
machine. Do not use batteries and the AC adapter at
the same time.
Keep free from vibration. Do not place near heavy or
vibrating machinery.
Avoid high humidity that might cause condensation.
Keep away from direct contact with water. Do not
spray or immerse the scales in water.
Do not place near open windows, air‐conditioning
vents or fans that may cause a draft and unstable
readings.
Keep the scales clean. Do not stack material on the
scale / balance when it is not in use.
5 | P a g e © Adam Equipment Company 2008