Acer XD1170 - Manual (Page 13)

 ... English
Installation
Power
Powering On the Projector
1. Remove the lens cap.
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash red.
3. Turn on the lamp by pressing “Power” button on the control
panel.And the Power LED will turn blue.
4. Turn on your source (computer, notebook, video player
,etc.). The projector will detect your source automatically.
 If the screen displays “No Signal”, please make sure the signal
cables are securely connected.
 If you connect multiple sources at the same time, using the
“Source” button on the remote control or control panel to
switch.
Powering On/Off the Projector
 Turn on the projector
first and then the signal
sources.
1