Nova-Tech Pulsafeeder OMNI DC7 - Manual (Page 24)

24
8. Replacement Parts
8.1 KOPkit Program
OMNI
®
KOPkits contain all replacement parts normally used in a preventative maintenance program.
(PULSAlube oil is also available separately for preventative maintenance programs. Refer to Section 6
– Equipment Startup). There is a specific KOPkit for every OMNI
®
pump model. Each KOPkit is
vacuum-packed for extended storage. All OMNI
®
pumps have the KOPkit number identified on the
pump nameplate and Pulsafeeder order documents. KOPkits can also be selected from the technical
data sheet shipped with the pump or by a Pulsafeeder representative. A list of the OMNI KOPkit
numbers can also be found on the next page. The kit is identified by the model number of the pump, the
wetted end material, and the process connection thread type. For models with tie-bar type check valves,
the appropriate components (check valve balls, seats, and o-rings) are supplied instead of the cartridges
pictured.
Figure 16, KOPkit parts
8.2 Ordering KOPkits or Parts
When ordering replacement parts always specify:
• Pump model and serial number (from pump nameplate), e.g., Model No. (DC7) with Serial No.
F406365-3.
• Part number and description from the OMNI ® parts list. Include the three-character suffix. (Note:
OMNI part numbers begin either with the letters NP, or the letter W, e.g., NP170001-THY or
W210221-001.)