PASCO DataStudio Starter Manual - Manual (Page 6)

DataStudio Starter Manual Manual No. 012-08107
6 ®
PASPORT Experiment Setup
Connect the desired sensor to a PASPORT interface (e.g. USB Link, Xplorer). DataStudio will
automatically detect the presence of the sensor, and create an appropriate display.
The measurements available will be shown in the Summary panel. In some instances, clicking the
Setup button can access additional measurements or units.
The Experiment Setup window shows which sensors are connected to the computer. This window also
shows the sampling rate for each sensor and available data types.
Sensors requiring calibration will have a calibrate button, which activates the calibration menu.
Set the sampling rate for the sensor.
Click the calibrate button to
calibrate the sensor.
Select the unit of measurement.