Alpine DVA-7996 - Manual (Page 45)

43
-EN
Remote Control Operation
1 AUDIO/NAV./EXT DVD Transmission Indicator
When the mode selector switch is switched, the
transmission indicators for the various modes light for
several seconds.
2 A.PROC Button
∗∗
Press the button to call the external audio processor
mode.
∗
3 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the radio's
presets.
MP3 mode: Press the Folder Select (UP) Button to
select the folder.
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending order.
4 POWER Button
Press the button to turn the power on/off.
5 Button
Radio mode: SEEK (DN) Button
1
2 u
y
t
r
w
4
6
8
9
7
5
3
p
q
e
i
Set the mode selector switch to the “AUDIO” side to
perform audio operations on the DVA-7996.
CD/Changer mode: Press the button to go back to the
beginning of the current track. Press and hold to fast
reverse.
MP3 mode: Press the button to go back to the
beginning of the current file.
6 Button
Radio mode: Pressing the button will select, in
descending order, stations programmed into the radio's
presets.
MP3 mode: Press the Folder Select (DN) Button to
select the folder.
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending order.
7 V.SEL Button
Used for switching the screen when the unit is used in
combination with a separately sold monitor, etc.
8
LIGHT Button
Lights the indicator.
9 VOLUME / Button
To increase or decrease the volume level.
p MUTE Button
Press the button to lower the volume by 20 dB instantly.
Press the button again to cancel.
q REAR Button
Press and hold for at least 2 seconds to switch the
remote control sensor.
w ANGLE / Button
Press the button to adjust the angle of the movable
audio display.
e Button
Performs stop.
r SOURCE Button
Press to select the audio source.
t Button
Radio mode: SEEK (UP) Button
CD changer mode: Press the button to advance to the
beginning of the next track. Press and hold to fast
forward.
MP3 mode: Press the button to advance to the
beginning of the next file.
y Button
Press the button to switch between play and pause.
u BAND Button
Radio mode:
Press the button and the band will change.
CD/Changer mode: To switch the disc mode.
i MODE Change Switch
Set to the “AUDIO” side to operate the DVA-7996.
Set to the “EXT DVD” side to operate a separately sold
DVD product.
Set to the “NAV.” side to operate a separately sold
navigation product.
When pressed, the mode switches to the TV mode.
Operate while the transmission indicator is flashing.
∗
For the operation of external audio processor, refer to the Owner's
Manual of the external audio processor you purchased.
∗∗
This button is used in conjunction with an optional Ai-NET
processor.
Operating audio for the DVA-7996
(Rear of the Remote Control)