Audio Design Associates Cinema Reference Mach II PTM-8150 - Manual (Page 96)

Page 95
5 Turn the Mode knob to select the desired non-Two Channel User Mode for this Input Label.
When done, press the Mode knob to continue with setting the Two-Channel User Mode for
this Input Label. To completely exit the setup menu, turn any knob other than the Mode
knob.
6 Turn the Mode knob clockwise one click until the display’s second line reads 2 CHANNEL and
then press the Mode knob.
7 Turn the Mode knob to select the desired Two Channel User Mode for this Input Label. When
done, press turn any knob other than the Mode knob to completely exit the setup menu.
8 Repeat steps 1-7 for all Input Labels whose User Modes you wish to alter.