Bosch TES80751DE VeroSelection 700 Kaffeevollautomat Edelstahl User Manual

Page 43

Advertising
background image

39

TES80.. | 04/2013

en

Contrast

The display

5 contrast can be set from

–10

to

+10

. The factory setting is

+0

.

● Turn the rotary knob

6 to select the

required setting.

Water hardness

● Turn the rotary knob

6 to select the

required water hardness

1, 2, 3

or

4

.

Info: It is important to set the water hard-

ness correctly, so that the appliance indi-

cates accurately when the descaling pro-

gramme should be run. The factory setting

for the water hardness is

4

.

You can check the water hardness using

the enclosed test strip or by asking your

local water supplier.

● Dip the test strip briefl y in water and

check the result after one minute.

Level Water hardness

German (°dH) French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

Water filter

A new water fi lter

29 must be rinsed before

it can be used.

● To do this, press the water fi lter

29 fi rmly

into the water tank

11 with the aid of the

measuring spoon

14. Fill the water tank

with water up to the “

max” mark.

● Turn the rotary knob

6 to select

start

and press the

start button 8.

Place 1 l container

Place suction pipe in container

start

● Place a container with a capacity of 1 litre

under the milk frother

10.

● Place the end of the suction pipe

10d in

the container.

● Press the

start button 8. Water will now

fl ow through the fi lter

29 to rinse it.

● Next, empty the container.

The appliance is ready for use again.

Info: Rinsing the fi lter 29 simultaneously

activates the setting for the “change fi lter”

display.

You can fi nd detailed information about the

water fi lter in the enclosed fi lter instructions.

The fi lter

29 is no longer effective when the

Service - change filter

display appears, or

at the latest after two months. It needs to be

replaced for reasons of hygiene and so that

there is no build-up of limescale (this could

damage the appliance).

Replacement fi lters can be obtained from

retailers (TCZ7003) or from customer

service (575491).

TES803_805_807_1DE.indb 39

08.05.2013 14:55:08

Advertising