AEG FAVORIT 50760 I - Manual (Page 10)

Operating Instructions
10
Prior to using for the first time
Prior to using for the first time, remove all the clips with which the
baskets are secured for transport.
Then perform the following steps:
0 1. Adjust the water softener
2. Fill with Salt for the Water Softener
3. Fill with Rinse Aid
Setting the water softener
To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
dishwasher therefore has a built-in water softener, in which tap water
with a hardness of 4°d (German degree) and harder is softened with the
aid of special salt.
3 Your local water authority will be able to inform you about the hard-
ness and hardness range of the water in your area.
The water softener can be set manually using the water hardness
switch; it can also be set electronically using the buttons on the control
panel.
Water hardness
Adjusting the hardness
setting
Indication on
the multi-dis-
play
In °d
1
In mmol/l
2 Range Manually Electronically
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28 9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
IV
1
10
3
9
8
7
6
10L
9L
8L
7L
6L
0*
19 - 22
15 - 18 3,3 - 3,9
2,6 - 3,2
III
5
4*
5L
4L
11 - 14 1,9 - 2,5 II 3 3L
4 - 10 0,7 - 1,8 I/II 2 2L
under 4 under 0,7 I
1
no salt
necessary
1L