Ionisation, Cool button, Diffuser – Bosch PHD9940 Profi-Haartrockner ProSalon PowerAC Compact User Manual

Page 11: Controls and accessories

Advertising
background image

9

PHD9940 03/2012

9

en

Ionisation

This appliance is equipped with an ion

generator. Ions are naturally present

electrically charge particles, which are

created in the appliance by an ion generator.

This makes the hair softer and easier to comb.

The static charge or "fly-away" tendencies in

the hair are reduced (= anti-static-effect).

The ion generator can be switched on in

combination with any level by pressing

the

ion switch 4 – the switch lights up red.

The ion generator can be switched off my

pressing the switch again.

Cool button

3

The Cool function is ideal for ‚setting‘ the

hair after drying. It fixes the individual hair

sections with the cool airflow.

Press the Cool button

3

to activate the

cooling function in any setting.

Press the Cool button

3

again to switch off

the cooling function.

Diffuser

The diffuser

7 is ideal for straight or

damaged hair. It gives fine, long or medium-

length hair more volume.

Hold the tips of the diffuser

upwards, tilt your head sideways

and run the diffuser into your

hair from below, lifting it up. The

hair should rest gently between

the individual fingers of the

diffuser while drying.

Use

● Set the fan and temperature to a low

setting.

● To ‘set’ the volume and natural curls,

press the Cool button

3

.

● Repeat the process with individual sec-

tions of hair.

Congratulations on purchasing this

Bosch appliance.

You have acquired a high­quality

product that will bring you a lot of

enjoyment.

Controls and accessories

1 Temperature toggle switch

k

– Setting 1 = low

– Setting 2 = medium

– Setting 3 = high

2 Fan toggle switch

l

– Setting 0 = off

– Setting 1 = gentle

– Setting 2 = strong

3 Lockable Cool button

3

4 Ionisation switch ion

5 Air inlet grill

6 Styling nozzle

7 Diffuser

8 Hanging eyelet

9 Cord clip

Use

The blow and temperature settings can be

freely combined.

General

● Never cover the blower or air inlet.

● Make sure the air inlet is free of lint and

hair.

● In the event of overheating, the appliance

switches off the heat automatically, cools

with the fan and switches the heat back

on again after a short time.

Important: Be sure to unplug the appliance

and wait a few minutes until it has cooled

down. It can then be used as before.

● To pre-dry wet hair, select the higher

setting 2. Hold the appliance about 10 cm

away from your head.

Advertising