2 configuring the camera – Airlink101 AICN1747W User Manual
Page 13
Advertising
- 12 -
3.2 Configuring the Camera
Step 1
Open SkyIPCam Utility by double clicking on its icon on your desktop.
Step 2
Click on Search to find the camera on your network. Select the Camera you wish to configure and
click on Link.
Note
If the Camera you wish to configure does not show up in the utility, make sure the camera is
properly connected to the same local network as your computer is, and the Green LED should be on.
Click on Search to try again.
Step 3
When you are prompted for the username and password, enter “admin” for both Username and
Password, and click OK.
Advertising