AudioBahn MULTIFUNCTIONAL SOURCE UNIT A3351 - Manual (Page 29)

Station Preset Memory
Automatic Seek and Preset Memory Mode (Auto Store)
Programmable Station Memory
Programming Station Title Memory
1) Select a band and tune to the desired radio station you wish to store in the preset
memory
2) Press and hold a Preset number [1 through 6] button for a second to store the station in
that preset slot.
1) Press and hold the [AST] button for a second to start Auto Store
2) The tuner will automatically seek and store 6 strong stations in FM3/AM2(AM)/LW/MW
mode in the order of signal strength. When the automatic memory has been completed,the
tuner goes to the frequency of first preset number of the stored preset number series.
N O T E The last band of each Tuner mode (FM3/AM2(AM)/LW/MW) is used for
Auto Store PresetTuner modes vary by location and are factory set
according to the area where the unit is sold
The name of a station can be stored in memory using up to 12 characters as a title.
Each of the 30 preset stations can be programmed with their own name.
1) Press and hold the [Band/Menu] button after tuning the station to be titled, the “NAMESET”
is displayed for a second and a “-“ cursor will be blink at the first character position.
Available characters> 0123456789,ABCDEFGHIJKLMNOPQRSTUVWXYZ,
abcdefghijklmnopqrstuvwxyz, *,+,-,.,/,:,;,<,=,>,?,@,[,],^,- ( _ means “space”.)
2) Turn the Rotary Encoder to select desired characters.
3) Press the [|<<] or [>>|] buttons to move the cursor position.
4) Press the desired Preset Number [1~6] button for more than a second to store the
station and title at the selected preset.
Tuner
27
Erasing Station Name
1) Press and hold the [ENTER] button when Station Title is displayed.
2) Press the [ENTER] button again when Station Title is flashing. The Station
frequency will be displayed automatically if the Station Title is erased properly.