Assembly – Poulan Pro PP14538 LAWN TRACTOR User Manual

Page 7

Advertising
background image

7

ASSEMBLY

FIG. 2

TO ROLL TRACTOR OFF SKID (See Op-

er a tion section for location and func tion of

con trols)

• Press lift lever plunger and raise attachment lift lever

to its highest po si tion.

• Release parking brake by depressing clutch/brake

ped al.

• Place gearshift lever in neutral po si tion.

• Roll tractor forward off skid.
• Remove banding holding deflector shield up against

tractor.

FIG. 3

CHECK BATTERY (See Fig. 3)

• Lift seat pan to raised position.
• If this battery is put into service after month and year

indicated on label (label located between terminals)

charge battery for minimum of one hour at 6-10 amps.

(See "BATTERY" in MAINTENANCE section of this

manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

NOTE: You may now roll your tractor off the skid. Follow

the appropriate instruction below to remove the tractor

from the skid.

WARNING: Before starting, read, un der stand and follow

all in struc tions in the Operation section of this manual. Be

sure tractor is in a well-ventilated area. Be sure the area in

front of tractor is clear of other people and objects.

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.
•

Remove adjustment bolt, lock washer and flat washer

se cur ing seat to cardboard packing and set aside for

as sem bly of seat to tractor.

•

Pivot seat upward and remove from the cardboard pack-

ing. Remove the cardboard packing and discard.

• Place seat on seat pan so head of shoulder bolt is

positioned over large slotted hole in pan.

•

Push down on seat to engage shoulder bolt in slot and

pull seat towards rear of tractor.

• Pivot seat and pan forward and assemble adjustment

bolt, lockwasher and flat washer loosely. Do not tighten.

• Lower seat into operating position and sit on seat.
•

Slide seat until a comfortable position is reached which

allows you to press clutch/brake pedal all the way down.

• Get off seat without moving its adjusted position.
• Raise seat and tighten adjustment bolt securely.

24

66

02464

SEAT PAN

SHOULDER

BOLT

ADJUSTMENT

KNOB

FLAT WASHER

SEAT

Advertising