PROLiNK PIC1007WP Quick Installation Guide - Manual (Page 5)

English
EN 3
1
2
3
4
5
6
7
8
3.
Important Notes Before Installation
4.
Choosing An Installation Method
Before you start, make sure you have a router ready with Internet connection.
mLiveView for Android device requires Android v2.3 or higher.
mLiveView for iPhone/iPad requires iOS v4.3 or higher.
LiveView for Windows requires Windows XP SP2 or higher.
Your PC/Laptop computer should be at least 2.0 GHz (dual-core recommended) and memory
2GB.
LiveView for Mac requires OS X 10.6.8 Snow Leopard or higher.
Your Mac PC/Laptop should be at least 2.0 GHz (dual-core recommended) - Intel Processors
only and memory 2GB.
If recording on local PC/Laptop, hard drive should have minimum 5~10 GB free space available.
To change settings of the camera, use the below default login credentials;
Username: admin
Password: (Leave Blank)
To play video of the camera, use the login credentials on the provided ID/Password card or from
the label at the bottom of the camera.
1
2
3
4
Wired Connection Setup: Use this method if using Ethernet cable to establish connection from
camera to router.
Smart WiFi Setup: This method is the easiest to setup wireless connection for your camera.
Requires camera with built-in WPS button and mLiveView version with Smart WiFi Setup
feature.
WPS Push Button Setup: This is another method to setup wireless connection for your camera.
Equally easy to setup but requires both camera and router to have built-in WPS button to
establish wireless connection.
Manual Wireless Setup: This manual method requires a wired connection initially from camera
to router. Then use either mobile or PC/Laptop to setup the wireless settings.
1
2
Note:
The LiveView installation guide is for Microsoft Windows OS platform only.
Before installing LiveView on your PC or Laptop, please make sure you have correctly installed the IP Camera. It is
highly recommended to close other Windows applications to prevent the installation from any possible confliction.