Aico 160 Series - Manual (Page 15)

Devices
15
NO ALARM - NO CHANCE!
Carbon Monoxide or (CO), is a particularly insidious gas. It is a killer.
The naked eye can't see it, it does not smell, it has no taste. The
need for a reliable mains powered alarm that will operate even in
the event of a mains failure is obvious.
The Ei professional range includes fully featured product usually
specified by Local Authorities & Landlords and less sophisticated
product where duty of care is not so much of an issue and where
the mains supply is more likely to be continuous and /or regular
battery maintenance is known to be reliably carried out.
The Ei261EN is the top of the range product. Current sensor
technology used by all manufacturers of CO alarms has a limited
life cycle; the sensors cannot be relied upon after a period of 5/6
years. The Ei261EN offers a replacement sensor feature, thereby
increasing the life cycle of the product to ten years.
Ei261EN Mains Powered CO Alarm with
Rechargeable Lithium Cells and
Replaceable CO Sensor
● 10 year+ rechargeable lithium cell back-up designed to outlast
the alarm
● Replacement sensor module, minimum five year life
● Easy to use test/hush button
● Automatic self diagnostics
● Distinctive alarm sound, easily distinguishable from a smoke alarm
● Wall or ceiling mounting
● Pre alarm warning
● Interconnect feature - Can be interconnected with Ei smoke and
heat alarms. Contact us for details
● Comprehensive Indicator lights: Mains on / Fault / Alarm on
● Optional digital display - Ei261DEN
● Quick CO gas test feature
RECHARGEABLE
LITHIUM CELLS
RECHARGEABLE
LITHIUM CELLS
EASY TO
REPLACE
SENSOR MODULE
EASY TO
REPLACE
SENSOR MODULE
INTERCONNECT
FEATURE
INTERCONNECT
FEATURE
BS EN 50291: 2001
ANCILLARY PRODUCTS
MCP401RC Manual Call Point
●
Supplied complete with surface
mount box
● Testing key supplied
● Supplied with non-breakable
operating element
● LPC approved, conforms to BS EN 54-11
● Can be used with 140, 150, 160RC Models
SAB300 Remote Strobe Xenon Beacon
●
Mains powered
● For internal or external use
● Flash energy of 3 watts and flash
frequency of .9Hz
● Clear or red lens options
● For operation via an Ei158R or Ei128R relay
SABV4 High Intensity Strobe Xenon Beacon
●
Mains powered
● Ideal for use where standard strobes
may not be sufficiently visible
● 5 joule high intensity flash
● Low current consumption
● Red or opal lens option
● For operation via an Ei158R or
Ei128R relay
YO3 Remote Sounder
●
Mains powered
● Use in areas where a warning is
required - but a detector isn't
● For internal or external use
● Switchable sound outputs from
97-100dB(A)
● For operation via an Ei158R or
Ei128R relay
MDH230 Magnetic Door Holder
●
Mains powered
● Will automatically release a fire
door in the event of a fire
● Test/Override button feature
● Low current consumption
● For operation via an Ei158R or
Ei128R relay
Ei167 Remote Sounder
●
Interconnects with all mains
operated smoke and heat alarms
● Ideal for use where an alarm but
no detection is required
● AC mains indicator light
Carbon Monoxide
(CO) Alarms
NOW WITH RC TECHNOLOGY OPTION
Further details of all the products
featured on these pages are
available from our Customer Service
Helpline on 0870 758 4000 or visit
our website www.aico.co.uk and
download our product information