Audiovox Video VDS102T - Manual (Page 6)

6
1. Infrared Sensor – Allows the remote control to operate the VDS102T and to control the DT102
when docked.
2. Three position Dome Light Switch
• Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior
illumination.
• Off – The dome lights will not turn on in this position.
• On – Turns on the dome lights.
3. Dome Lights – Provide additional interior illumination.
4. Channel (5) Button – Used this button to increase the channel number to the desired number.
5. Channel (6) Button – Used this button to decrease the channel number to the desired number.
6. Auto Program Button – Allows the user to scan and store active TV stations into memory.
7. Screen Release – Moves in the direction of the arrow to release the drop down screen.
8. Shuttle Shut-off Switch – Turns off the DT102 when closed.
9. Security Lock Knob – Used to ensure that the shuttle is not released accidentally.
10. 24 Pin Signal Interface Connector – Used to connect the shuttle to the docking station.
11. Shuttle Release – Press to release the shuttle from the docking station.
12. POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off.
13. FMM Select Button – When this button is pressed it will turn on the wireless FM Modulator and
then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz;
Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).
14. Source Select Button – Used to select one of the three sources (DVD, AV1, TV)
Controls Function Descriptions