Data sheet – QLogic 8200 Series DataSheet User Manual

Page 3

Advertising
background image

83820-580-00 Rev. F 07/13

3

Data Sheet

Host Bus Interface Specifications

Bus Interface

PCI express

®

Gen2 x8

Host Interrupts

INtx, MSI, and MSI-X

I/O Virtualization (VMflex)

NPaR

Compliance

PCI Express Base Specification, rev. 2.0; PCI Express

Card Electromechanical Specification, rev. 2.0; PCI Bus

Power Management Interface Specification, rev. 1.2

Ethernet Specifications

Throughput

10Gbps full-duplex line rate per port

Ethernet Frame

1500 byte or 9600 byte (jumbo frame)

Stateless Offload

IP, tCP, and user datagram protocol (UDP) checksum
offloads

Large and giant send offload (LSO, GSO)

Large receive offload (LRO)

Receive side scaling (RSS)

Interrupt coalescing

VMware

®

NetQueue

Microsoft

®

VMQ

Compliance

IEEE: 802.3ae (10Gb Ethernet), 802.1q (VLAN),
802.3ad

1

(Link Aggregation), 802.1p (Priority

Encoding), 802.3x (Flow Control), IPv4 (RFQ 791), IPv6
(RFC 2460), 802.1Qbb (Priority-Based Flow Control),
802.1Qaz (Enhanced Transmission Selection)

FCoE Specifications

Logins

Support for 2,048 concurrent logins and 2,048 active
exchanges

Port Virtualization

N_Port ID virtualization (NPIV)

Compliance

SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre
Channel Tape (FC-TAPE) Profile, SCSI Fibre Channel
Protocol-2 (FCP-2), Second Generation FC Generic
Services (FC-GS-2), Third Generation FC Generic
Services (FC-GS-3), FCoE & FIP (FC-BB-5)

1 Contact your QLogic sales representative regarding supported
configurations.

iSCSI Specifications

Compliance

RFC 3720 (iSCSI), RFC 3347 (iSCSI Requirements and
Design Considerations
), ChaP, iSNS, SLP

Tools and Utilities

Management Tools and Device Utilities

QConvergeConsole: a unified management tool
(GUI and CLI) for Fibre Channel/FCoe, iSCSI, and
networking

Native OS management tools for networking

Boot Support

Pre-execution environment (PXe), FCoe, and iSCSI
boot

APIs

SNIa hBa aPI V2, SMI-S

Operating Systems

For the latest applicable operating system information,
see

http://driverdownloads.qlogic.com

.

Physical Specifications

Ports

QLe8240: single 10Gbps ethernet

QLe8242: dual 10Gbps ethernet

Form Factor

Low-profile PCIe card: (6.6in. × 2.54in.)

Custom form factors also available

Environment and Equipment Specifications

Temperature

Operating: 0°C/32°F to 55°C/131°F

Storage: –20°C/–4°F to 70°C/158°F

Humidity

Relative (noncondensing): 10% to 90%

Storage: 5% to 95%

Maximum Cable Distances (Optical)

QLe824x-SR: 300m, OM3 multimode fibre

Agency Approvals

Safety

US, Canada, europe

EMI and EMC (Class A)

US, Canada, europe, australia/New Zealand, Japan,
Korea

Ordering Information

QLE8240-CU (single port)
QLE8242-CU (dual port)

Ships without transceivers. Intended for use with
copper cables (not included). a list of approved copper
cables is posted at

http://www.qlogic.com/Resources/

Documents/LineCards/Copper_Cables_Support_
Matrix_Line_Card.pdf

QLE8240-SR (single port)
QLE8242-SR (dual port)

Ships with SR optical transceivers installed

Advertising