Adaptec AHA-1740A - Manual (Page 32)

Also ensure that the following microcode files are present.
•
standard.hex Standard mode microcode
•
enhanced.hex Enhanced mode microcode
To run the program, type adl . The first screen displays.
If the program does not properly display on a monochrome or
VGA monitor, you can type:
adl /m or adl /mono
to run the program in monochrome mode. If the screen does not
display properly try typing:
mode bw80
before running the adl program.
Figure 5-1. Host Adapter Listing
adaptec AHA-1740A/1742A/1744
5-2