ADIC Scalar Series - Manual (Page 38)

28 Equipment Description
Barcode Scanner
Enables/disables the barcode scanner. If disabled, the Initialize Scan Barcodes, Configuration Menu parameter
(see above), and the Scan Barcodes sub-function of the Map Slots Diagnostics Menu function (see Appendix A), is
ignored. If disabled, the barcode scanner is not available to the application software.
p To disable the barcode scanner use the UP or DOWN keys to select "N". Press ENTER to execute the
change.
Note
Enable Barcode Scanner default setting is Y.
Diagnostics Menu
The following functions are available under the Diagnostics Menu:
l Drive Type l Error Counters
l Event Counters l Operation Log
l F/W Revision l Position Picker at Slot
l Position Picker at Mailbox (When Mailbox-equipped) l Position Picker at Drv
l Pick From Slot l Pick From Mailbox (When Mailbox-equipped)
l Pick From Drv l Place In Slot
l Place In Mailbox (Scalar 458 only) l Place In Drv
l Map Slots l Calibrate X and Y
l Test Secondary Fan l Open Drive Door
l Close Drive Door
For detailed descriptions of these functions, refer to Appendix A.