Antec VSK2450 - Manual (Page 5)

4
1.3 P OWER S UPPLY S PECIFICATIONS
The VSK‐2450/VSK‐2450P is powered by a VP‐450/VP‐450P power supply.
Input:
VP450
Voltage
100 ~ 240VAC ± 10%
Frequency Range 50Hz ~ 60Hz
Current 9A @ 115VAC, 4.5A @ 230VAC
Efficiency Min. 82%
VP450P
Voltage
200 ~ 240VAC ± 10%
Frequency Range 50Hz ~ 60Hz
Current 3.5A @ 230VAC
Efficiency Min. 80% at full load
Output:
Voltage: +5V +3.3V +12V
1
+12V
2
‐12V +5Vsb
Maximum load 15A 24A 18A 18A 0.8A 2.5A
+12V
1‐2
maximum output: 360W (18A)
+3.3V and +5V combined maximum output: 120W
Total Continuous Power: 450W
A variety of industrial‐grade safety circuitry will help protect your computer: OVP (Over Voltage
Protection), SCP (Short Circuit Protection), and OCP (Over Current Protection). Sometimes the
PSU will “latch” into a protected shutdown state. This means that you will need to power off the
supply and clear the fault before it will function again.
Note: There are no user‐replaceable fuses in the VP450/VP450P.