Installation and connection – Bosch HMT82M650 - Inox Micro-ondes User Manual

Page 27

Advertising
background image

27

Installation and connection

This appliance is only intended for domestic use.
This oven is intended for builtĆin use only. It is not

intended for counterĆtop use or for use inside a

cupboard.
Please observe the special installation instructions.
The appliance can be installed in a 60 cm wide

wallĆmounted cupboard (at least 30 cm deep and

85 cm off the floor).
The appliance is fitted with a plug and must only be

connected to a properly installed earthed socket. The

fuse protection must be rated at 10Ăamperes

(automatic circuit breaker with trigger characteristic L

or B). The mains voltage must correspond to the

voltage specified on the rating plate.
The socket must only be installed and the connecting

cable must only be replaced by a qualified electrician.

If the plug is no longer accessible following

installation, an allĆpole disconnecting device must be

present on the installation side with a contact gap of

at least 3Ămm.
Adapters, multiway strips and extension leads must

not be used. Overloading can result in a risk of fire.

Advertising