Server ECD (07500 ) - Manual (Page 4)

PUMP DISASSEMBLY
ᕡ
REMOVE O-RING FROM CONNECTOR.
• &DUHIXOO\SU\RULQJRIIZLWK¿QJHUV
Do not use a tool or any sharp object to remove
o-ring, this will damage the o-ring.
ᕢ
REMOVE CONNECTOR FROM
FLEXIBLE PLASTIC TUBE.
• Rotate and pull connector away from
ÀH[LEOHSODVWLFWXEH
ᕣ
REMOVE FLEXIBLE PLASTIC TUBE FROM
BOTTOM OF PUMP HOUSING.
• 5RWDWHDQGSXOOÀH[LEOHSODVWLFWXEHDZD\IURP
pump housing.
ᕤ REMOVE PUMP DOME FROM PUMP HOUSING.
• Unhook loop from bottom of dome to release
dome from bottom tube of pump housing.
ᕥ
REMOVE PINCH VALVE FROM INSIDE PUMP
HOUSING.
ᕦ REMOVE DISCHARGE TUBE FITTING FROM END OF
DISCHARGE TUBE.
• 8QKRRNORRSIURPERWWRPRIGLVFKDUJHWXEH¿WWLQJ
to release from pin on discharge tube.
• 5RWDWHDQGSXOOGLVFKDUJHWXEH¿WWLQJDZD\IURP
discharge tube.
PUMP ASSEMBLY
ALWAYS CLEAN PUMP THOROUGHLY BEFORE EACH USE.
SEE UNIT TAKE-DOWN, PUMP DISASSEMBLY, PUMP
ASSEMBLY, SAFETY GUIDELINES, AND CLEANING.
ᕡ
INSERT PINCH VALVE INTO PUMP HOUSING
DISCHARGE TUBE.
ᕢ INSTALL DOME ONTO PUMP BODY.
•
$OLJQYDOYHÀDSLQVLGHGRPHWREHRQWRSRI
opening between pump body and pump body
discharge tube.
•
Place loop onto pump housing tube to secure
dome.
ᕣ INSTALL FLEXIBLE TUBE ONTO PUMP BODY
SHORT EXTENSION TUBE.
•
Use small amount of water as lubricant when
LQVWDOOLQJÀH[LEOHWXEH
•
5RWDWHÀH[LEOHWXEHRQWRSXPSERG\VKRUW
extension tube until projections on pump body
short extension tube align with holes in
ÀH[LEOHWXEH
•
5RWDWHDQGSRVLWLRQÀH[LEOHWXEHZLWKFRQQHFWRU
on opposite end to be pointing away from
pump body discharge tube.
ᕤ INSTALL CONNECTOR ONTO FLEXIBLE TUBE.
•
Use small amount of water as lubricant when
installing connector.
•
5RWDWHFRQQHFWRULQWRÀH[LEOHWXEHXQWLO
projections on connector align and fall into
KROHVLQÀH[LEOHWXEH