Teledyne 6000B - Photometric analyzer - Manual (Page 53)

Photometric Analyzer Operation 3
Part I 3-27 Teledyne Analytical Instruments
Figure 3-2: Examples of Autoranging Schemes
3.7 The Analyze Function
Normally, all of the functions automatically switch back to the Analyze
function when they have completed their assigned operations. Pressing the
Escape button in many cases also switches the analyzer back to the Analyze
function. Alternatively, you can press the Analyze button at any time to return
to analyzing your sample.
The Analyze function screen shows the impurity concentration and the
application gases in the first line, and the range in the second line. In the lower
right corner, the abbreviation Anlz indicates that the analyzer is in the
Analyze
mode. If there is an * before the Anlz, it indicates that the range is linearized.
1.95 ppm SO2
R1:Ø —10 *Anlz
If the concentration detected is overrange, the first line of the display blinks
continuously.
0 0.01 0.1 80 90 100