Teledyne 6200T - Sulfides Analyzer - Manual (Page 86)

Getting Started Model 6200T Total Sulfur Analyzer
Teledyne Analytical Instruments 86
3.4.4.2. Calibration Procedure for the O
2
Option
If your analyzer is equipped with the optional O
2
sensor, this sensor should be calibrated
during installation of the instrument. Refer to Section 9.10.1 for instructions.
3.4.4.3. Calibration Procedure for the CO
2
Option
If your analyzer is equipped with the optional CO
2
sensor, this sensor should be
calibrated during installation of the instrument. Refer to Section 9.10.2 for instructions.
Note Once you have completed the above set-up procedures, please fill out
the Quality Questionnaire that was shipped with your unit and return it
to Teledyne Analytical Instruments. This information is vital to our
efforts in continuously improving our service and our products. THANK
YOU.