Teledyne 7600 - Infrared gas analyzer - communication manual - Manual (Page 5)

Teledyne Analytical Instruments
5
3. CONNECTION
WARNING: For avoiding electric shock and malfunctions, do not turn on power supply until
all wiring has been completed.
3.1 Terminal allocation (Input / Output terminal CN2)
Terminal number Signal name Pin connection
2 Receive data
3 Transmit data
5 Signal GND
Others NC
9-pin D-Sub (male)
3.2
Connection
As connecting cable, use a commercially available RS-232 reverse cable.
Connect the cable to CN2 on the input/output terminal block (on rear for 7500, separate for
7600).