World Dryer AirSpeed - Manual

AIRSPEED ™ MODEL WA
Surface Mounted NO TOUCH ™ MODEL NT
Surface Mounted
A R C H I T E C T U R A L A N D E N G I N E E R I N G S P E C I F I C A T I O N S
AIRSPEED™
AND
NO TOUCH™ HAND DRYERS
AIRSPEED™ AND NO TOUCH™ SPECIFICATIONS
Airspeed™ and No Touch™ hand dryers shall be manufactured by or for
World Dryer Corporation® to include housing of .08“ thick die cast aluminum.
Front panel shall be in ebony gloss for the NoTouch™ and brushed aluminum
for the Airspeed™. Housing to be finished with chrome plating or white epoxy
paint. Motor shall be of shaded pole (brushless) type operating at maximum
3200 RPM at rated load, delivering 98 cubic feet per minute of air volume
(5300 LFM). Timer shall be electromechanical cam style with 25 amp rated
switch to operate dryer for 30 seconds on push button units. No Touch™
dryers shall be activated by means of an infrared emitting/receiving electronic
control device. Recessed kits will include a 16 gauge steel wall-mounting box.
Hand dryers shall be listed under reexamination service of Underwriters
Laboratories, Inc.
5700 McDermott Drive | Berkeley, IL 60163 | 800-323-0701 | 708-449-6950 | Fax 708-449-6958 | www.worlddryer.com
SPECIFIER'S APPROVAL
Job __________________________________ Date _________________
Model Number ______________________ Housing Option ___________
Quantity ______________ Recess Kit (KNTR-973) __________________
Variations _____________________________________________________
Customer/Wholesaler ___________________________________________
Contractor _____________________________________________________
Architect/ Engineer ______________________________________________
Electronic specifications available online: www.worlddryer.com/specs
FACTS
Saves up to 95% of paper towel costs
Reduces maintenance costs, vandalism
and mess associated with paper towels
Saves trees from becoming paper towels
Reduces burden on clogged landfills
Uses less energy and produces fewer
greenhouse gases than the production
of paper towels
FEATURES
Quiet induction brushless motor, no
need to replace brushes
Tamper resistant screws lock cover
securely to base
Resilient motor mounting rings and
factory-lubricated, self-aligning bearings
for long motor life
Dynamically balanced blower wheel for
vibration-free running
Heating element is side-mounted at
blower air inlet, designed for maximum
heat transfer, with auto shut-off safety
features controlled by an internal
thermostat
Designed for light traffic or noise
sensitive areas
WARRANTY
5 year limited
AIRSPEED ™ MODEL WA
with Recessing Kit