Audiovox Prestige P-MC3 - Manual (Page 6)

TROUBLESHOOTING
An error made in operation or during installation of this product may be mistaken for a system malfunction. Please perform
the checks described below before contacting your dealer or service facility.
No power
Magazine cannot be
installed
CD is not played
Noise, skipping, or
intermittent sound
during playback.
Blown fuse
Incorrect connection
Magazine is inserted in wrong
direction
Disc is loaded incorrectly in magazine
Scratches on disc or warped disc
Extremely dirty disc
Mounting angle adjustment on the CD
changer is not correct
Possible Cause Remedy Symptom
Check fuses in vehicle fuse box and changer system.
Replace as necessary with fuse of same type and rating as
original. If fuse blows again, consult with service facility.
Check all wiring and correct as necessary.
Insert magazine in proper direction.
Load disc correctly in the magazine.
Check sound on another disc. If sound from second disc is
OK, first disc is defective.
Clean disc
Set the mounting angle adjustment to the correct position as
per the installation instructions of the CD changer.
4
ERROR SIGNS
If a problem should develop while operating the CD changer, the following error signs may be displayed on the LCD panel:
Indicates abnormal disc change function. Contact the place of purchase for further service advise.
Indicates excessive temperature conditions. The error sign will go off and play will resume when
the changer temperature returns to normal range.
Magazine is not loaded in the changer.
No discs are loaded in the magazine.
No disc is loaded in magazine slot #1. (2--- indication for slot #2, etc.) E - 01 :
E - 30 :
- - - - :
0 - 0 0 :
1 - - - :