FEC DSP1500 (SAN3) - Manual (Page 2)

enFORCE Operation Manual
PAGE 1 - 2
Chapter 1: Outline
1.1 About this Operation Manual
This manual details the configuration, specifications and the operation of the enFORCE Digital
Servo Press System.
The following table outlines the contents of each chapter.
Chapter Title Contents
1 Outline
Basic characteristics and requirements of the enFORCE
System.
2 Specifications General specifications of the enFORCE System.
3 System Description Description of standard and optional system components.
4 System Setup and Wiring
Equipment installation guidelines, dimensions, wiring, Input
and Output signal descriptions and requirements for PLC
programming.
5
Power Up and Initial
Checks
Preliminary power on and operational tests.
6 System Operations
Instructions for the input of preset data and monitoring
explanations.
7 Maintenance Guidelines for preventative maintenance.
8 Troubleshooting Description of abnormal conditions and corrective actions.
Any questions regarding the contents of this document or any related matter should be
directed to FEC Inc. at (586) 781-2100 or faxed to (586) 781-0044.
The Information set forth in the following document is the property of FEC Inc. This
document shall not be released to or copied for any person and/or organization without
the expressed prior consent of FEC Inc.
Unauthorized reproduction or distribution of this manual is strictly prohibited. Please
contact FEC Inc. if additional copies are required.
Throughout this manual will be 2 types of note boxes used to magnify the importance of the subject
being discussed:
Text boxes showing this symbol contain Important information or
hints to aid in setup.
Text boxes showing this symbol contain Caution information and
should be followed to avoid personal injury or damage to the
equipment.
DSP User Console Manual (Revision 2)
Related Documentation