FEC DSP1500 (SAN3) - Manual (Page 2)

enFORCE Operation Manual
PAGE 2 - 2
Chapter 2: Specifications
2.1 System Specifications
Power Supply Voltage 180VAC ~ 242VAC, 3 phase, 50/60Hz
Operating Conditions Temperature: 0 ~ 50℃ (32 ~ 122℉)
Humidity: 20-90%, no condensation
Operating Range Duty Cycle less than 60%
Storage Conditions Temperature: -5 ~ 55℃ (23 ~ 131℉)
Humidity: Below 90%, no condensation
Shipping Conditions Temperature: -5 ~ 55℃ (23 ~ 131℉)
Humidity: Below 90%, no condensation
Press Accuracy From 1/2 to full scale - 3σ less than 3% scatter
of target load.
From 1/4 to 1/2 of full scale load - 3σ less than
4% scatter of target load.
Minimum Distance Display 0.01mm (up to 99.99mm), 0.1mm (over
99.99mm)
Distance Repeatability ±0.01mm
Force Transducer Accuracy
±1% (0 – Full Scale)
Linearity of Force Transducer
±0.5% of Full Scale value (maximum)
Operation Method
Load Control / Distance Control
Force Needed Motor Used Required SAN Unit Tool Type
Up to 0.2 ton ６０Ｗ ＳＡＮ３－２４Ｓ ＤＰＴ－０２１Ｒ１－＊＊ＦＳ
Up to 0.5 ton ８０Ｗ ＳＡＮ３－２４Ｓ ＤＰＴ－０５１Ｒ２－＊＊ＦＳ
Up to 0.5 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－０５１Ｒ３－＊＊ＰＳ
Up to 1.0 ton ２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－１０１Ｒ３－＊＊ＦＳ
Up to 1.0 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１０１Ｒ４Ｈ－＊＊ＰＳ
Up to 1.5 ton ２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－１５１Ｒ３－＊＊ＦＳ
Up to 1.5 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１５１Ｒ４Ｈ－＊＊ＰＳ
Up to 2.0 ton ２００Ｗ ＳＡＮ３－４０Ｓ ＤＰＴ－２０１Ｒ３－＊＊ＦＳ
Up to 2.0 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－２０１Ｒ４Ｈ－＊＊ＰＳ
Up to 3.0 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－３０１Ｒ４Ｈ－＊＊ ○Ｓ
Up to 5.0 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－５０１Ｒ４Ｈ－＊＊ＦＳ
Up to 5.0 ton ３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－５０１Ｒ５－＊＊ＰＳ
Up to 7.0 ton １５００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－７０１Ｒ４Ｈ－＊＊ＦＳ
Up to 10.0 ton ３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１０２Ｒ５－＊＊ ○Ｓ
Up to 15.0 ton ３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－１５２Ｒ５－＊＊ ○Ｓ
Up to 20.0 ton ３０００Ｗ ＳＡＮ３－１２０Ｓ ＤＰＴ－２０２Ｒ５－＊＊ ○Ｓ