Aristokraft LD425C - Manual (Page 94)

Copying
72
2
F
Enter the vertical size of the copy with the number keys, and then press
{q} key.
G
Press [OK] twice.
H
Place the originals, and then press the {Start} key.
Note
❒ To change a length in steps C to F , press the key you wish to change and
enter the new value.
Sort
The machine assembles copies as sets in sequential order.
Important
❒ To use the Rotate Sort function, two paper trays loaded with same size and
type paper, but in different orientation (KL), are required. See “Paper Type:
Tray 1-4”, General Settings Guide.
❒ You cannot use the bypass tray with Rotate Sort.
❖ Sort
Copies are assembled as sets in sequential order.
❖ Rotate Sort
Every other copy set is rotated by 90 degrees (KL) and delivered to the copy
tray.