Multifunction accessory, After using the appliance, Cleaning – Bosch MSM88190 User Manual

Page 10: Operation

Advertising
background image

10

Robert Bosch Hausgeräte GmbH

Fig.

Put ingredients into the blender jug.

Place the gear attachment on the base unit

and lock into position.

Insert the whisk into the gear attachment

and lock into position.

Warning!

Never insert the whisk into the base unit

without the gear attachment (Fig.=

-3).

Insert the mains plug.

Set required speed using the speed control

(recommendation: high speed).

Grip base unit and blender jug and press

required On button.

Release the On button after processing.

After using the appliance

Remove mains plug.

Press the release buttons and remove

the base unit from the gear attachment.

Remove the whisk from the gear

attachment.

Cleaning

Warning!

Never immerse the gear attachment in liquids

and do not clean under flowing water or in the

dishwasher.

The whisk can be cleaned in the dish-

washer.

Wipe the gear attachment with a damp

cloth only.

Multifunction accessory

Please fold out the illustrated pages.
Fig.

8 Bowl

9 Kneading hook

10 Universal blade

11 Carrier disc for disc inserts

12 Disc inserts

a) Slicing attachment – coarse

b) Slicing attachment – fine

c) Shredding insert – medium

d) Grating disc insert – coarse

13 Lid with gears

14 Pusher

Operation

The multifunction accessory is suitable

for kneading, cutting and shredding food.

Always observe the maximum quantities

and processing times in the table (Fig.=

).

Warning!

Multifunction accessory must be completely

assembled before use!
Caution!

Before cutting meat, remove gristle, bones and

sinews.

The multifunction accessory is not suitable for

cutting very hard food (coffee beans, radishes,

nutmeg) and frozen food (fruit, etc.).

Kneading hook/universal blade

Kneading hook for kneading small amounts of

dough

Universal cutter for cutting meat, hard cheese,

onions, herbs, garlic, fruit, vegetables, nuts,

almonds.

Always observe the maximum quantities and

processing times in the table (Fig.=

).

en

Risk of scalding!

When processing hot milk, use a tall, narrow

receptacle for blending. Hot milk may splash

and scald you.

Risk of injury from sharp blades/

rotating drive!

While the appliance is operating, never

place fingers in the mixing bowl.

Always use the pusher for adding ingre-

dients. After switching off, the drive

continues running for a short time.

Change tools only when the drive

is at a standstill.

When working with the multifunction acces-

sory, the base unit may be switched on only

when the lid has been attached and

screwed on tight.

The blade is sharp and

can cause injury!

Never grip the blades of the universal blade.

Take hold of the universal blade by the

plastic handle only. Do not touch blade with

bare hands. Clean them with a brush.

Advertising