ATEN ACS-1208L - Manual (Page 18)

Starting Auto Scan:
To start Auto Scanning, key in the following Hotkey combination:
1. Invoke Hotkey Mode with the [NumLock] + [-] combination
2. Key in [A]
After you press A, you automatically exit Hotkey Mode, and enter Auto
Scan Mode.
3. To exit Auto Scan Mode, press [Esc] or [Spacebar]
Note: While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto
Scan Mode in order to regain normal control of the console.
w
Skip Mode
This feature allows you to switch between computers in order to monitor
them manually. You can dwell on a particular port for as long or as little as
you like - as opposed to Auto Scanning, which automatically switches after a
fixed interval. To invoke Previous/Next Switching, key in the following Hotkey
combination:
1. Invoke Hotkey Mode with the [NumLock] + [-] combination
2. Key in [Arrow]
Where [Arrow] refers to the left or right Arrow key. After you press [Arrow],
you automatically exit Hotkey Mode, and enter Skip Mode where you can
switch ports as follows:
←
Skips from the current port to the first accessible port previous to it. (See
Scan/Skip Mode, p. 21, for information regarding accessible ports.)
→
Skips from the current port to the next accessible port.
↑ Skips from the current port to the last accessible port of the previous
Station.
↓ Skips from the current port to the first accessible port of the next Station.
Note: 1. Once Skip Mode has been invoked, until you exit, you can keep
on skipping simply by pressing an Arrow key. You don’t have to
use the [NumLock] + [-] combination again.
2. While Skip Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Skip Mode compliant keystrokes
can be input. You must exit Skip Mode in order to regain normal
control of the console.
3. To exit Skip Mode, press [Esc]
2002-01-15
14 ACS-1208L / ACS-1216L User Manual