Fairbanks SCB-R9000-14U Ultegra Bench Scale - Manual (Page 11)

Section 4: Customer Care
09/13 11 51222 Rev. 3
Problem Possible Source / Remedy
Pushbuttons Will Not Operate
First unplug, then plug in the power cord to reset the program. IF you are
using a remote display, check the main display first, if it's OK then check the
cable and plug connection on the remote
Display Locked or Inoperative
First unplug, then plug in the power cord to reset the program . IF you are
using a remote display, check the main display first, if it's OK then check the
cable and plug connection on the remote.
Display Indicates "HiCAP Weight on the platform exceeds 150 lbs, remove load.
No USB Output
Check that both cable end connectors are securely fastened. Check
the cable for damage. Check the Hub or USB port for problems.