Fairbanks 27135 TeleWeigh with Bluetooth - Manual (Page 10)

08/07 10 51166 Revision 1
Section 3: Bluetooth Communications
Bluetooth ® Introduction
The Fairbanks TeleWeigh™ Health Scale, shown in Figure 3.1 below, is designed to
communicate with external Bluetooth
®
enabled devices using compatible
communications software. These devices are called Remote Devices. They can be
computers, health monitoring equipment or other Bluetooth® enabled devices. They
are programmed by the Remote Device manufacturer to use one of several
Bluetooth® communications methods. Please refer to the Remote Device manual for
the specific steps required to use the Fairbanks TeleWeigh™ Health Scale with the
Remote Device.
NOTE: Not all Bluetooth
®
enabled
devices have software to communicate
with the TeleWeigh
™ Health Scale. The
scale is designed to be part of a system
when the Bluetooth
®
interface is used.
The system consists of the scale plus a
Remote Device.
Figure 3.1.
TeleWeigh ™ ™ ™ ™ Health Scale