Farm Star LRHD-8 - Manual

SAFETY PRECAUTIONS
MOST ACCIDENTS OCCUR BECAUSE OF NEGLECT OR CARELESSNESS.
AVOID NEEDLESS ACCIDENTS BY FOLLOWING ALL OF THE SAFETY PRECAUTIONS LISTED BELOW.
• Machinery should be oper ated only b y those who are
responsible and are authorized to do so.
• Stop the engine , lo wer all equipment, loc k the br akes,
and remove the ignition key before dismounting from the
tractor.
• Never stand between tractor and implement while tractor
is being backed to hitch.
• Loose fitting clothing should not be w orn, to avoid catch-
ing on various parts.
• Detach implement in area where children normally do not
play.
• When perf orming adjustments or maintenance on an
implement, first lower it to the ground or block it securely
at a workable height.
• Only a qualified oper ator should be per mitted on tr actor
when in operation; no riders allowed.
• Make cer tain e veryone is in the clear bef ore star ting
tractor or raising or lowering equipment.
• Operate the tr actor and implement only while seated in
the driver’s seat.
• Reduce speed when tr ansporting mounted implements
to a void bouncing and momentar y loss of steer ing
control.
• A hea vy load can cause instability of the tr actor. Use
extreme care during road travel. Slow down on turns and
watch out f or b umps. Tractor ma y need front counter-
weights to counter-balance the weight of the implement.
• Reduce speed on hillsides or cur ves so there is no
danger of tipping.
• Avoid driving too close to the edge of ditches or creeks .
• Do not tr ansport implement on pub lic roads without
reflectors and slo w mo ving v ehicle emb lem in da ylight
and with appro ved w arning lights at night and other
periods of poor visibility.
• Due to the width of some implements , use extra caution
on highways, farm roads, and when approaching gates.
• Always be sure the implement is in the proper position for
transport.
• Keep alert and watch the front as w ell as the rear when
working with the implement.
OWNER’S/
OPERATOR’S
MANUAL
MODEL NO.’s
DCR-4 MCR-6
DCR-5 MCR-7
LRHD-6
LRHD-7
LRHD-8
CAUTION
For Safe Operation
Read Rules And
Instructions Carefully
SINO LEEINGLES, PIDA AYUDA
A AIGUIEN Q UE SI LO LEA
PARA QUE LE TRADUZCA LAS
MEDIDAS DE SEGURIDAD.
CAUTION
THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE THOROUGHLY UNDERSTOOD
BEFORE ATTEMPTING TO BEGIN ASSEMBLING THIS MACHINE
1. Select an area for assembly that is clean and free of any
debris which might cause persons w orking on the
assembly to trip.
2. Do not lift hea vy par ts or assemb lies. Use cr ane, jac k,
tackle, fork trucks or other mechanical devices.
3. Preview the assemb ly instr uctions in y our oper ator’s
manual before proceeding further.
4. If the assembly instructions call for parts or assemblies to
be blocked up, use only blocking material that is in good
condition and is capab le of handling the w eight of the
assembly to be b locked. Also insure that the b locking
material is on a clean, dr y surface.
5. Never put hands , or an y part of body, under b locked up
assemblies if at all possible.
6. After completing assemb ly, thoroughly inspect the
machine to be sure that all n uts, bolts, hydraulic fittings
or any other f astened assemblies have been thoroughly
tightened.
7. Before oper ating the machine , thoroughly read the
operation section of your operator’s manual.
8. Before operating, read the maintenance section of y our
operator’s man ual to be sure that an y par ts requir ing
lubrication, such as gearbo xes, are full, to a void an y
possible damage.
9. Before operating equipment – If y ou ha ve an y
questions regar ding the pr oper assemb ly or
operation, contact your dealer or representative.
OWNER’S/
OPERATOR’S
MANUAL
MODEL NO.’s
DCR-4 MCR-6
DCR-5 MCR-7
LRHD-6
LRHD-7
LRHD-8
MARCH 2006
WS-LE003-OG
MAKE EVERY DAY
A HOLIDAY FROM ACCIDENTS
WORKSAVER, INC.
P.O. BOX 100 LITCHFIELD, IL 62056-0100 (217) 324-5973
WEB: http://www.worksaver.com E-MAIL: [email protected]
3 PT. LANDSCAPE RAKE
Safety Instructions Assembly & Mounting
Tractor Preparation Maintenance
Operating Instructions Repair Parts
3 PT. LANDSCAPE RAKE
DCR Series – Cat. 0/I – up to 25 hp
MCR Series – Cat. I – up to 40 hp
LRHD Series – Cat. I – up to 50 hp
WHEN ORDERING REPAIR PARTS,
ALWAYS GIVE THE FOLLOWING INFORMATION:
1. PART NUMBER
2. PART DESCRIPTION
3. MODEL NUMBER
4. NAME OF ITEM
DCR-4
LRHD-7
(Rakes shown with optional gauge wheels)