Alpine CDA-118M - Manual (Page 41)

39
-EN
Selecting a Disc (Changer) (Optional)
An optional 6-disc or 12-disc CD Changer may be connected to this unit
if it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input of this unit, the CD Changer will be controllable from
this unit.
Using the KCA-410C (Versatile Link Terminal) multiple changers can
be controlled by this unit.
See “Multi-Changer Selection (Optional)” on page 39 for selecting the
CD Changers.
• The controls on this unit for CD Changer operation are operative
only when a CD Changer is connected.
• The DVD changer (optional) is controllable from this unit as well as
the CD changer.
1
Press CD to switch to the CD Changer mode.
2
Press and hold PRESET for at least 2 seconds.
The DISC CHANGE screen is displayed.
3
Turn the Rotary encoder to select a disc.
4
Press /ENTER.
The selected disc number appears in the display and
CD/MP3/WMA/AAC playback starts.
• You can also switch the DISC by pressing PRESET.
Playing MP3 Files with the CD Changer
(Optional)
If you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press CD to switch to the MP3 Changer mode.
2
Press PRESET to select the desired disc.
3
To pause playback, press / .
Pressing / again will resume playback.
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to
“CD/MP3/WMA/AAC” page 10 to 14.
Multi-Changer Selection (Optional)
When using KCA-410C (Versatile Link Terminal), you can connect two
changers and two external outputs (AUX).
Press CD until the desired CD Changer appears on the
display.
• If the CD Changer is not connected, the display will show “NO
CHANGER”.
• To operate the selected changer, see “CD/MP3/WMA/AAC” (page 10
to 14).
• For further details about the external input (AUX) when using
KCA-410C, see “Setting the AUX Mode (V-Link)” on page 25.
Changer (Optional)
PRESET
CD
/ENTER
Rotary encoder
/