General Pump LK Repair Manual - Manual (Page 6)

GENERAL PUMP
A member of the Interpump Group
LK SERIES
Page 6
Unscrew the crankcase cover attachment screws (pos. 1, fig. 9) and remove it. Slip off the O-ring and replace
it if necessary.
Now remove the two bearing covers by unscrewing the screws (pos. 1, fig10). To help with their removal, use
2 M8 grub screws or screws (pos. 1, fig 11) as extractors. Slip off the O-ring and replace if necessary.
Insert a shim under the shank of the central connecting rod, to stop the rotation of the crankshaft
(pos. 1, fig. 12).