Advanced Global Technology RR101 - Manual (Page 10)

In
s
ta
lla
ti
o
n
Installation
Mounting to the Windshield
1. Insert the 2 suction cups into
the larger side of the holes
on the car mounting bracket
and slide outward to lock in
place. (Figure 1).
2. Loosen the thumb screw and
rotate the Sportscaster car
mount to the appropriate
angle for your vehicle's
windshield. Retighten the
thumb screw. Place the
suction cups on the
Sportscaster car mount in an
appropriate location on your
windshield. Press firmly to
secure the car mount in
place. (Figure 2).
3. Push the Sportscaster into
the car mount until it locks
into place. (Figure 3).
4. Connect the DC Power,
antenna and audio
connectors (if required) to
the appropriate jacks.
(Figure 4).
5. For best reception, place the
XM antenna on the vehicle’s metallic roof, at least 6” from any window or sunroof.
It can be placed in the front, middle, or rear of the roof. (Figure 5).
6. To remove the Sportscaster XM Satellite Radio Receiver, push the release tab on
the top of the Sportscaster car mount upward and pull the Sportscaster forward.
If the car is a convertible, you may mount the antenna on the metal trunk lid. It
should be at least 4” from the rear window. Ensure that the antenna and cable
don’t interfere with the opening or closing of the convertible top and the trunk lid.
10